top of page
LETO SERIES
LETO SERIES
Heavy weight underfloor wheel lathes
The machine can manufacture standalone bogies or stand alone wheel sets as long as the external preloads are used and considering those have to be hoisted by the crane to reach the working position
This stroke can vary based on the railway width (gauge width)
If gauge width is 1.435 [mm],
the stroke is of 930 [mm]
European Norms 2006/42/CE
< 80 [dBA]
100 to 120 Will depend on the final lay-out
Between 250 and 270 [kN] depending on the chosen options
250 [mm]
1.000 - 1.676 [mm]
Adaptable gauge width – railways width
Other width can be considered – Upon request
Wheel Outside Diameter
500 - 1.600 [mm]
Max load per wheel set
400 [kN] - 40 [t]
Series of Wheel Sets that can be machined
With external bearing boxes
With internal bearing boxes
Mechanically connected
With or Without brake disc
Max chip size
From 0 to more than 10 [mm²]
Monolithic wheels
Monolithic wheels with conical or corrugated rim
Wheels with flanged brake discs
Series of Wheels that can be machined
Series of brake discs
- Monolithic discs fixed on the shaft
- Sectored discs fixed on the shaft
- Monolithic discs flanged on the inside or on the outside of the wheel
- Sectored discs flanged on the inside or on the outside of the wheel
Min distance between consecutive couple wheel sets
1.100 [mm]
Vertical Stroke
Longitudinal Stroke
Machine Alone - Weight
Installed Power
Noise Level
Used Standards
bottom of page